Albuterolsulfat | Ventolin | Proventil Pharma Inhaltsstoff Clenbuterol-Ersatzchemikalie
Albuterolsulfat
Albuterol Sulfate Basic Chemical Info :
Also Known as Ventolin and Proventil
CAS-Nr: 51022-70-9
EINECS-Nr: 242-424-0
Molekularformel: (C13H21NO3)2·H2SO4
Molekulargewicht: 576.71
Reinheit: 99.8%
Aussehen: weißes Puder, löslich im Wasser und Ethanol .
Albuterol -Sulfatanwendungen:
albuterol is a short-acting β2-adrenergic receptor agonist used for the relief of bronchospasm in conditions such as asthma and chronic obstructive pulmonary disease. It is usually given by the inhaled route for direct effect on bronchial smooth muscle. This is usually achieved through a metered dose inhaler (MDI), nebulizer or other proprietary delivery devices (z.B. Rotahaler or Autohaler). Used in the treatment of bronchial asthma, asthmatic bronchitis, emphysema, patients bronchospasm.
Albuterol Sulfate Pharma Ingredient Chemical Test Specifications:
| Testelemente |
Spezifikation |
Testergebnisse |
| Aussehen |
white oralmost white,crystalline powder |
Anpassen |
| Solubility |
Freely soluble in water,practically insoluble or very slightly soluble in alcohol and in methylene chloride. |
Anpassen |
| Identifikation |
1 |
The UV absorption spectrum of the sample shows an absorption maximum at 276nm.The specific absorbance at the Maximum is55 to 64. |
Anpassen |
| 2 |
Infraed absorption spectrophotometry. |
Anpassen |
| 3 |
Chromatogram obtained with test solution (B) is similar in position color & size to the principal spot in the chromatogram obtained with the reference solution. |
Anpassen |
| 4 |
An orange-red color develop in methylene chloride layer. |
Anpassen |
| E |
It geves reaction (a) of sulphates. |
Anpassen |
| Appearance of solution |
Solution S is clear and not more intensely coloured than reference solution in BY6. |
Anpassen |
| Optische Rotation |
-0.10° to +0.10°determined on solution S. |
+0.01° |
| Acidity or alkalinity |
NMT 0.4ml of 0.01M HCL is required to change the color of the indicator to red. |
Anpassen |
| Related substances |
Impurity J ≤0.20% |
Anpassen |
| Any other impurity ≤0.30% |
Anpassen |
| Total impurity ≤1.0% |
Anpassen |
| Boron |
≤50ppm |
Anpassen |
| Sulphated ash |
≤0.10% |
0.06% |
| Verlust beim Trocknen |
≤0,5 % |
0.30% |
| Probe(on dried basis) |
98.0~101.0% |
98.8% |
| Fazit |
The test results above BP2009 |
